M House, Ecologically Friendly Homes, Residential Building USA

M_House, NY, USA : Ecologically Friendly Home

M_House Project - design by EPIPHYTE Lab

29 Jul 2011 M_House Architects: EPIPHYTE Lab, LLC Architectural Design + Research Collaborative M_House project CORNELL UNIVERSITY, College of AAP, Department of Architecture, Ithaca, New York The M_House system is intended for the design and fabrication of ecologically friendly homes. It uses an assembly process in which prefabricated panels and ribs are brought together to form prefabricated modules which are then shipped to the site and joined. The M_House is designed using a 3D parametric CAD model that allows for rapid reconfiguration of the basic construction system. Thus, one can test multiple morphological, performative and programmatic strategies efficiently. pictures from EPIPHYTE LabStevens The M_House is primarily composed of two basic elements – ribs and panels. The ribs of the M_House are assembled out of 3 overlapping layers of ¾” plywood. Their 16” depth allows for 3 sections to be cut from a sheet of 4’ x 8’ material with minimal wastage. The templates for the end cuts are generated by the CAD system. The 16” depth of the rib also allows the infill panels to be staggered without curving them, enabling the creation of morphological variation. The infill panels, which are always 4’ wide, slot between the ribs. While bracing the structure laterally, themselves they bear little load, thus their framing can be sized to accommodate appropriate insulation – in the current design they are assembled out of GWB, 2 x 4 studs, ½” OSB sheathing, batt insulation, rigid foam insulation and wood shingles. They can carry windows or any number of cladding materials, as well as solar thermal or photovoltaic devices, and their 4’ width means they can be assembled out of stock sheet materials. Despite producing, in the aggregate, the appearance of curvilinear form, all the components of the M_House are flat. The fact that the ribs are wood means that thermal bridging problems are minimized. The M_House strives for adaptability in both flexibility of the design system and in the continuing extension and reuse of assemblies. Since the design system is parameterized, multiple configurations of the system can be tested for appropriateness to site, program and climate. Although the system can be built with a basement, it is best used without one, since the continuous rib allows the house to sit on a line of sonotube pier foundations that minimizes site impact and concrete usage. The linear nature of the system means that later extension is simple, encouraging the design of small, potentially enlargeable dwellings. Panels and ribs are easily disassembled for either relocation or recycling. Design Principals: Dana Čupková, Kevin Pratt; Design Team: Monica Freundt, Kyriaki Kasabalis, Jamie Pelletier M_House images / information from EPIPHYTE Lab, LLC Architectural Design + Research Collaborative

New York Architecture Walking Tours

New York State Architecture

Another american house design by EPIPHYTE Lab, Architects:

HSU House, Ithaca

picture : Susan & Jerry Kaye
HSU House

New Houses

New York Houses - Selection

Bay Residence, Long Island, NY
Stelle Architects

photo : Jeff Heatley

Long Island House, New York State
Thomas Phifer and Partners

image © Scott Frances

House Designs



New York Architecture

New York Building News

New York State Architecture - Residential Selection

Holley House, Garrison
hanrahanMeyers architects

photo : Michael Moran
Holley House

Centrifugal Villa, Southampton
OBRA Architects

picture from architect
Centrifugal Villa

New York Architects

Comments / photos for the M_House page welcome: This email address is being protected from spambots. You need JavaScript enabled to view it.

M_House : page - adrian welch / isabelle lomholt

[Back to Top]

Tweet